Nordson Asymtek X-1010 User Manual

Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 4-89 P/N 196515 (Revision A)
Lesson 4-7
Troubleshooting Pneumatics
A. Introduction
Pneumatic failure symptoms include loss of fluid pressure, loss of valve pressure
and a leaky regulator. It may be necessary to make appropriate adjustments to
the air pressure settings to correct this problem.
B. Enabling Objectives
4.7 Identify possible causes of pneumatic failure.
C. Topic Outline
1. Introduction
2. Overview
 Pneumatics Fault Isolation Procedure
 Troubleshooting Guidelines
3. Summary and Review

Nordson Asymtek X-1010 Specifications

General

Type	Dispenser
Accuracy	±25 µm
Fluid Types	Adhesives, sealants
Z-axis Clearance	Customizable based on configuration
Resolution	1 μm
Dispensing Technology	Positive Displacement
Maximum Dot Size	Varies with application
XY Positioning Accuracy	±25 µm
Z Axis Resolution	1 μm
Machine Dimensions	Varies based on configuration
Weight	Varies based on configuration
Power Requirements	200-240 VAC, 50/60 Hz