Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 1-9 P/N 196515 (Revision A)
Lesson 1-3
Startup/Shutdown Procedures
A. Introduction
To ensure safe operation of the X-1000 Dispensing Systems, all personnel
working on or around the dispensing systems should be aware of all electrical
power and pneumatic distribution sources and follow recommended
startup/shutdown procedures.
B. Enabling Objective
1.3 Identify electrical power and pneumatic distribution sources and
demonstrate proper startup/shutdown procedures.
C. Topic Outline
1. Introduction
2. Overview
Main Power Inlet/Circuit Breaker
ON/OFF Button
Pneumatic Regulators and Gauges
Service Shutdown
Lock Out/Tag Out of AC Power and Pneumatic Pressure
Post-Service Startup
3. Summary and Review
To Next Page
Loading...
