Nordson DuraBlue II

To Next Page

To Previous Page

Operating Parameters

B-11

Part 1126931_01

 2018 Nordson Corporation

Input 4

Description:

Control options that determine the function of input 4.

Value:

0 - Input Disabled

1 – Standby On/Off

2 – Motor 1 On/Off

3 – Motor Enable/Disable

4 – Hose/Applicator 1 Enable/Disable

5 – Hose/Applicator 2 Enable/Disable

6 – Hose/Applicator 3 Enable/Disable

7 – Hose/Applicator 4 Enable/Disable

8 – Hose/Applicator 5 Enable/Disable

9 – Hose/Applicator 6 Enable/Disable

11 - Motor 2 Enable/Disable

Resolution:

Default Value:

Format:

—

Use:

If Motor Enable/Disable (3) is selected, the motor will not turn on unless the

pump is enabled and the correct voltage is present on the input contacts.

Refer to Installing Melter Inputs in Section 3, Installation, for information about

setting up inputs.

NOTE: Multiple inputs can be set to the same input value. After one or more

inputs that have the same input value are energized, the input functionality will

not be considered inactive (off) until all of the inputs with the same input value

are de‐energized (Multiple inputs set to the same input value are logical ORed.).

34 – 39

Optional Inputs 5, 6, 7, 8, 9, and 10