Nordson DuraBlue II - PID Selection

Operating Parameters
B-19
Part 1126931_01
 2018 Nordson Corporation
PID Selection
80-91
PID Selection for Receptacles, Hose/Applicator 1, 2, 3
and 4
Description:
Used to change the preset PID selections. Use parameter 80 to select the value
for hose1, parameter 81 to select the value for applicator 1, and so on.
Value:
0 = Hose
1 = Standard gun
2 = Large gun
3 = Air heater
Resolution:
—
Default Value:
0 or 1 depending on the channel type (hose or gun)
Format:
—
Use:
Consult your Nordson representative before changing PID settings.