Nortek Signature Series User Manual

Commands 23
© 2017 Nortek AS
Command
Description
Scope
GETTMAVG/
GETTMAVGLIM
Get Averaging Mode Telemetry argument limits
SETTMBURST /
GETTMBURST /
GETTMBURSTLIM
Set/Get Burst Telemetry Settings
Get Burst Telemetry argument limits
Command mode
SETTMALTI/
GETTMALTI/
GETTMALTILIM
Set/Get Altimeter Telemetry Settings
Get Altimeter Telemetry argument limits
Command mode
TMSTAT
Returns number of bytes in the telemetry file
Command mode, Data
retrieval mode
DOWNLOADTM
Download telemetry data
Command mode, Data
retrieval mode
STOREHEADERTM
Command mode
ERASETM
Erase telemetry file
Command mode, Data
retrieval mode
TAG
Write tag to output file and data output
All modes
BBPWAKEUP
Wakes up the Doppler processor | Ethernet interface
only, see Ethernet description
All modes

Nortek Signature Series Specifications

General

Type	Acoustic Doppler Current Profiler (ADCP)
Operating Temperature	-5°C to +45°C
Storage Temperature	-20°C to +60°C
Temperature Sensor	Integrated
Pressure Sensor	Integrated
Compass and Tilt Sensor	Integrated
Data Storage	Internal memory
Communication Interfaces	Ethernet, RS-232
Depth Rating	Up to 6000 meters (depending on model)
Data Output	ASCII, binary
Beam Angle	Varies by model
Velocity Accuracy	±0.5% of measured velocity ±1 mm/s