*HWWLQ
6WDUWHG
How to Select a Programming Method
12 AFC-600 Programming PN 51032:A 3/8/99
+RZWR6HOHFWD3URJUDPPLQJ0HWKRG
The AFC-600 provides two methods for field-programming the control panel: using the
Program Change options or the Veri•Fire™ 600 Upload/Download Utility. Table 4 lists
the benefits of each method:
7DEOH )LHOG3UR
UDPPLQ
2
WLRQV
+RZWR(QWHUD3URJUDPPLQJ3DVVZRUG
The AFC-600 provides two types of selectable passwords: Program Change and Status
Change. For security purposes, you can change your passwords. To do so, follow the
instructions in "How to Change a Password (3=
PASSWD
)" on page 26. Refer to Table 5
for uses and the factory-set password for each type of programming password:
7DEOH 3UR
UDPPLQ
3DVVZRUGV
Enter a password to enter Program Change or Status Change. In Program Change or
Status Change, the control panel does the following:
• Activates the System Trouble relay (TB5 on the MPS-6)
• Shuts off the panel sounder
• Flashes the
SYSTEM
TROUBLE
LED, which continues to flash while programming
Programming method Benefits Refer to
Program Change Speed and convenience of
putting the control panel on
line quickly (using the
Autoprogram function) and
changing programming
information.
"How to Use the Basic
Program" on page 15
Veri •Fire 600 600 Upload/
Download Utility
Efficient means of creating
and editing programs that
require a lot of data entry.
"How to Install Veri•Fire
Components" on page 85
Password type Use to Factory Setting
Program Change
(high level)
Enter Program Change (see Figure 8 on page 15) to
program control essential control panel functions,
including basic system functions and utility options.
(For more information on Program Change selection,
refer to "What is Program Change?" on page 13.)
00000
Status Change
(low level)
Enter Status Change (see the "Status Change Screen"
on page 39) to program minor program functions.
11111
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
Need help?
General
