Notifier AFC-600 Programming Manual

What are Type Codes?
$
SS
HQGL[ * 7
\S
H &RGHV
AFC-600 Programming PN 51032:A 3/8/99 95
$
SS
HQGL[*7
\S
H&RGHV
:KDWDUH7\SH&RGHV"
Type Codes are software selections that you select for initiating devices (detectors and
monitor modules) and output devices (control modules, NACs, and Panel Circuits).
Some Type Codes are self-explanatory; that is, the Type Code matches the function of
the device, such as a “Monitor” for an monitor module, “Photo” for a photoelectric
detector, and so on. Type codes also provide special functions, such as activating
switches, solenoids, and control panel functions.
+RZWR6HOHFWD7\SH&RGH
You select a Type Code through the Point Programming screen. For instructions, refer
to "How to Modify or Delete a Point (2=
POINT
)" on page 21.
,QWKLV$SSHQGL[
This appendix contains detailed descriptions of Type Codes for input and output
devices, as listed in Table 44,
7DEOH  7
\S
H &RGH 5HIHUHQFHV
Type of Device
Refer to
page
Type Codes for Intelligent Detectors 96
Type Codes for Monitor Modules 97
Type Codes for Control Modules 99
NAC and Panel Circuit Type Codes 100
Appendix H: Glossary 101
Technical Manuals Online! - http://www.tech-man.com

Notifier AFC-600 Specifications

General

Brand	Notifier
Model	AFC-600
Category	Fire Alarms
Language	English