3-6
StatStrip Glucose Hospital Meter
14.UsetheSafetyLancettopuncturethenger.
15.Squeezethengertoformadropofblood.Wipe
awaytherstdropofbloodthensqueezethenger
again to form a second drop of blood.
Figure 3.6 Squeeze the Finger to Form a Drop of Blood
16. The Apply Sample screen should be displaying.
When the blood drop appears, touch the end of
the test strip to the blood drop until the well of the
test strip is full and the meter beeps.
WARNING: The test strip must ll completely upon touching
the blood droplet. If the test strip does not ll com-
pletely, do not touch the test strip to the blood
droplet a second time. Discard the test strip and
repeat the test with a new strip.
Figure 3.7 Touch Test Strip to Blood Drop Screen
13:42
Touch test strip to blood drop
Remove test strip to cancel test
Op: ****
Name: A Unit-1
StatStrip Glu IFU 1.86 PN55848E EN 510K.indd 6 9/13/18 8:29 AM