•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Revision Date Description
Dec. 2, 2018
Added the following sections:
mstarchive - Binary Files
Compression Tool
Using mstconfig to Split a Port in a
Remotely Managed Switch
mstcongestion - Tool for Setting
Congestion Mode and Action
mstprivhost
3.3 Sept. 26, 2018
Updated section “Command Parameters” on
page 80. Added the following note to the “bb”
option:
Note: The MFT 'bb' option is an advanced flag
used ONLY for production flows. It is NOT
recommend to use it as it can cause
unrecoverable firmware burning failures.
July 4, 2018
Updated the following sections:
Examples of mst Usage - FreeBSD
Supported Configurations and their
Parameters:
Added the following parameters:
BOOT_UNDI_NETWORK_WAIT,
MKEY_BY_NAME,
ECPF_ESWITCH_MANAGER,
ECPF_PAGE_SUPPLIER,
FLEX_PARSER_PROFILE_ENABLE,
FLEX_IPV4_OVER_VXLAN_PORT,
SAFE_MODE_THRESHOLD and
SAFE_MODE_ENABLE
Updated mstfwreset Synopsis
Added table Impact of Secure Firmware on MFT
to section Secure Firmware Update
Added the following sections:
Re-Signing a Binary Image File
mstfwreset for SmartNICs
Added items to section mstfwreset Limitations
To Next Page
Loading...
Need help?
General