mstflint Added a CRC check for the full image Linux
Support for query/burn of clp-gpxe ROM Linux
Prevents burning a ConnectX-2 image onto a ConnectX device and
vice versa
Linux
Added a logging option to mstflint Linux
For the ConnectX device family only:
Added commands for an independent burn/read/remove of an
Expansion ROM image.
For firmware versions earlier than 2.7.000
: It is possible to read the
ROM image, or to replace an already existing ROM image (by the
burn command). However, burning a new ROM image in case a
previous image did not exist is not possible, nor is it possible to
remove an existing ROM image
Linux
mstburn Added the -fw_dir option which looks for a suitable firmware file in
the given directory
Linux
Support for generating a non-fail-safe image for ConnectX/
ConnectX-2, InfiniScale IV, and BridgeX devices
Linux
Debug tools Updated the msti2c utility Linux
Added the mget_temp utility which reads the temperature of the
ConnectX/ConnectX-2, InfiniScale IV, and BridgeX devices
Linux
mstflint Bug Fixes History
The table below lists the history of bugs fixed.
Internal
Ref. No.
Issue
1918749 Description: mstlink tool displays a wrong speed when using ETH cables on
ConnectX-6 adapter cards.
Keywords: mstlink
Discovered in Version: 4.13.0
Fixed in Release: 4.14.0-1
1797470 Description: Fixed an issue that prevented the mstflint tools from recognizing the
second port on dual port devices.
Keywords: mstflint, dual port devices
Discovered in Version: 4.12.0
Fixed in Release: 4.13.0
To Next Page
Loading...
Need help?
General