Removed prerequisite libraries: expat and zlib-devel Linux
The package tools, libraries and headers are now installed under:
{ prefix }/bin or { prefix }/lib and { prefix }/include dirs. Directory /
usr/mst is not created. For example, the “mread”, “mwrite” and
“mcra” tools that were previously installed by default under /usr/
mst/bin, now are installed under /usr/bin
Linux
Linux
Removed the InfiniScale® and InfiniBridge® tools Linux
Removed the Infinivision tool set Linux
Removed the isw tool. The isw tool functionality was replaced by the
"msti2c" tool. For example, to scan the devices on the i2c bus, run:
> msti2c -d <dev> scan instead of > isw -d <dev>
Linux
mstflint Added support for flash type SST25VF016B Linux
Added support for flash type M25PX16 Linux
Added an option to set the VSD and GUIDs in a binary image file.
This is useful for production to prepare images for pre-assembly
flash burning. These new commands are supported by Mellanox 4th
generation devices
Linux
Added an option to set the VSD and GUIDs on an already burnt
device. These commands (“sg” and “sv”) re-burn the existing image
with the given GUIDs or VSD. When the 'sg' command is applied on
a device with blank (0xff) GUIDs, it updates the GUIDs without re-
burning the image
Linux
mst Added support for using ibutils2/ibdiagnet and ibnetdiscover in the
'mst ib add' command
Linux
Removed the _uar, _msix and _ddr devices from the mst device list Linux
Debug tools Added support for routing I2C bus to the IS4 device on IS50XX
systems
Linux
Rev. 2.6.1
Bug Fixes See MFT Bug Fixes History Linux
Rev. 2.6.0
mstflint
installation
change
Added the options: --without-image-generation, --disable-dc, and
--without-kernel which allow for a partial installation in order to
avoid problems with SW dependencies
Linux
Now allows a non-root user to prepare mstflint RPMs Linux
All Added Mellanox ConnectX®-2 and BridgeX® support Linux/
Windows
To Next Page
Loading...
Need help?
General