•
•
•
•
•
mst Added support for using ibnetdiscover in the 'mst ib add' command Windows
mstburn Added support for VPD read/write Windows
Rev. 2.7.0a
Bug Fixes See MFT Bug Fixes History Linux
Rev. 2.7.0
General Added support for Mellanox ConnectX®-3 and SwitchX™ silicon
devices
Linux
Added Secure host feature which enables ConnectX family devices
to block access to its internal hardware registers. The hardware
access in this mode is allowed only if a correct 64 bits key is
provided (see mstflint changes).
mstflint tools cannot run on a device with hardware access
disabled. This feature is enabled only with supporting firmware
Linux
Removed support for Itanium (ia64) Linux
mstflint Added the following commands:
enable/disable access to the hardware
set/change the key used to enable access to the hardware
Linux
The ROM section in the image now contains multiple boot images.
Therefore the mstflint was modified to display information for all of
the images in the ROM section
Linux
Added support to display/burn UEFI ROM Linux
Added support for burning firmware via Command Line interface on
SwitchX devices
Linux
mstburn Added option to add or replace a single keyword in the VPD writable
section (-vpd_set_keyword flag)
Linux
Added the option to set a binary VPD field data Linux
mstflint
installation
Added the option --without-kernel which allows user to install
mstflint without the mst kernel
Linux
Rev. 2.6.2
mstflint
installation
change
RPM based installation:
Applications are installed using a pre-compiled binary
RPM
Kernel modules are distributed as a source RPM and
compiled by the installation script
Fast installation process
Linux
To Next Page
Loading...
Need help?
General