•
•
•
•
•
•
•
Added the option to display the configuration’s default values. All
mstflint Added support to calculate checksum on selected sections in the
firmware image.
All
Added the option to attach a timestamp to the firmware image. All
Burning Tools Improved firmware burn performance in livefish mode on 5th
generation devices.
All
Added the ability to show the running firmware version in case it
does not match with the burnt firmware version on the flash. This
case generally occurs after firmware upgrade and before firmware
reload.
All
mstreg Added support for mstreg tool which can be used to modify access
registers or to query them.
All
mst Created an mst device per physical function. It can be seen by
running 'mst status -v'.
All
mstfwmanager Added support to create self-extractors in VMware ESXi OSs. VMware ESXi
fwtrace Added support for the fwtrace tool in FreeBSD. FreeBSD
mstfwreset Added support for mstfwreset in Windows and FreeBSD. Windows
FreeBSD
Rev. 4.1.0
General Added support for ConnectX®-4 Lx Linux/
Windows/
FreeBSD
Added support for ConnectX®-4 FreeBSD
mstconfig Added support for the following configurations in ConnectX-4,
ConnectX-4 Lx and Connect-IB:
IB Dynamically Connect
Internal Settings
RoCE Congestion Control ECN
RoCE Congestion Control Parameters
Wake on LAN
Linux/
Windows/
FreeBSD
Added support for the following configurations in ConnectX-3 and
ConnectX-3 Pro:
InfiniBand Boot Settings
Preboot Boot Settings
Linux/
Windows/
FreeBSD
msttrace Added support for MEM mode in ConnectX-4 Windows
To Next Page
Loading...
Need help?
General