Oki C9600 Service Manual

Oki Data CONFIDENTIAL
42930511TH Rev. 2 182 /
Table 7-1-1 Operator Alarm (8/10)
judgment
Yes
No
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
No
Yes
Cause
Paper jam
detected in fuser
or between fuser
and paper output
area.
Paper jam
detected when
paper started to
enter double-side
printer unit.
Some sort of jam
occurred in paper
feed route.
Paper jam detected
between cassette
and black ID.
Printer engine detects
paper that is
abnormal (45mm or
more) according to
setting.
One of the toners
are almost empty.
Paper Output
Stacker is Full
Specified Cassette
is Out-Of-Paper or
removed. Or the
cassette used in
the printing process
is out-of-paper.
Cassette 1, 2, 3,
4or 5 has been
detected to be Out-
Of-Paper
Fuser Counter
Exceed Life
Paper Near-End
Detection
Cannot write to
HDD.
Error Description and Analysis
1) Check for paper jam inside the
fuser and between the Yellow
ID and fuser.
2) Check if the paper output
switch is normal.
Check the entrance or inside the
double-side printer for paper jam.
JAM CHECK
1) Check for paper jam around
the cassette and between the
Yellow ID.
2) Check to see if the paper
entry switch is normal.
1) Is the paper a custom size?
2) Is the paper a standard size?
1) The specified toner cartridge is
almost empty.
2) Check to see if the specified
toner sensor is normal.
1) Check if the stacker is full.
2) Check if the Stacker Full
Sensor activator is normal.
1) Check if MT is Out-Of-Paper.
2) Check and see if the out-of-
paper sensor activator is
normal.
1) Check and see if the specified
cassette is out-of-paper.
2) Check and see if the out-of-
paper sensor activator is
normal.
1) Is an Error message displayed?
2) Is this immediately after the fuser
unit was replaced?
Is the tray paper level low? (less
than about 30 sheets)
Is there any error in the opera-
tional procedures?
Remedy
Remove the paper jam.
Replace paper output switch.
Remove the paper jam.
Check/replace double-side printer
unit.
Remove the paper jam.
Remove the paper jam.
Replace the entry switch.
Remedy Unnecessary
Adjust the cassette paper size
guide.
Paper Size Switch Replace.
Replace with a new toner kit.
Replace the specified toner sensor.
Remove paper from stacker.
Replace the Stacker Full Sensor.
Put paper in MT.
Replace Out-Of-Paper Sensor.
Put paper in specified cassette.
Replace the corresponding out-of-
paper sensor.
Check the Fuser Unit Life
Replace the fuser immediately or at
the next maintenance.
Refill with paper.
Check Paper Near-End Sensor
Check the manual usage proce-
dures.
HDD malfunction.
Replace HDD.
Display
Open cover
Paper Jam
Top cover
Please see
HELP for details
Open cover
Paper Jam
Top cover
Please see
HELP for details
Open cover
Paper Jam
Side cover
Please see
HELP for details
Open cover
Paper Jam
COVER
Please see
HELP for details
Check paper
Paper size error
TRAY
Please see
HELP for details
Change Toner
COLOR
Please see
HELP for details
Remove Paper
Stacker
Please see
HELP for details
Insert paper
MP Tray
MEDIA SIZE
Please see
HELP for details
Insert paper
TRAY
MEDIA SIZE
Please see
HELP for details
Replace Fuser
Tray*Paper
Almost Finished
File system
access error
<n>
600
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
1200
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓

Oki C9600 Specifications

General

Brand	Oki
Model	C9600
Category	All in One Printer
Language	English