Oki C9600 Service Manual

Oki Data CONFIDENTIAL
42930511TH Rev. 2 183 /
Table 7-1-1 Operator Alarm (9/10)
judgment
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Cause
GDDC Error
Belt Slit Sensor
Error
Duplex FAN0
Alarm Detection
Duplex 24V
Abnormal Current
Detection
Yellow Image
Drum Lock Error
Magenta Image
Drum Lock Error
Cyan Image Drum
Lock Error
Black Image Drum
Lock Error
Tray2 24V
Abnormal Voltage
Detection
Tray3 24V
Abnormal Voltage
Detection
Tray4 24V
Abnormal Voltage
Detection
Tray5 24V
Abnormal Voltage
Detection
Fuser Motor Lock
Error
Waste Toner
Transfer Motor
Lock Error
Sub-CPU Clock
Frequency Error
Duplex CPU
Clock Frequency
Error
Inverter CPU
Clock Frequency
Error
Error Description and Analysis
910: Tray1 GDDC Error
911: Tray2 GDDC Error
912: Tray3 GDDC Error
913: Tray4 GDDC Error
914: Tray3 GDDC Error
The belt is not running properly.
Does the error message still
appear after rebooting?
Error of the fan in the duplex
unit
Does the error still occur after
rebooting?
24 V of power is not supplied to
the duplex unit properly.
Does the error still occur after
rebooting?
The Y ID unit is not operating
properly.
Does the error message still
appear after rebooting?
The M ID unit is not operating
properly.
Does the error message still
appear after rebooting?
The C ID unit is not operating
properly.
Does the error message still
appear after rebooting?
The K ID unit is not operating
properly.
Does the error message still
appear after rebooting?
24 V of power is not supplied to
tray 2 properly.
24 V of power is not supplied to
tray 3 properly.
24 V power is not supplied to
tray 4 properly.
24 V of power is not supplied to
tray 5 properly.
The fuser is not operating
properly.
Does the error still occur?
The waste toner transfer motor is
not operating properly.
Does the error still occur?
The Sub-CPU clock frequency is
not correct.
Does the error still occur?
The duplex CPU clock frequency
is not correct.
Does the error still occur?
The inverter CPU clock fre-
quency is not correct.
Does the error still occur?
Remedy
Check to confirm that the tray is
mounted correctly.
Replace the geared motor of the
tray.
Check to confirm that the belt is
mounted correctly.
Replace the belt.
Check to confirm that the duplex
unit is mounted correctly.
Check the connection of the fan.
Replace the fan.
Check to confirm that the duplex
unit is mounted correctly.
Check the connection of the fan.
Replace the fan.
Check to confirm that the Y ID
unit is in position.
Replace the Y ID unit.
Replace the Y ID motor.
Check to confirm that the M ID
unit is in position.
Replace the M ID unit.
Replace the M ID motor.
Check to confirm that the C ID
unit is in position.
Replace the C ID unit.
Replace the C ID motor.
Check to confirm that the K ID
unit is in position.
Replace the K ID unit.
Replace the K ID motor.
Check to confirm that tray 2 is
mounted correctly.
Check to confirm that tray 3 is
mounted correctly.
Check to confirm that tray 4 is
mounted correctly.
Check to confirm that tray 5 is
mounted correctly.
Check to confirm that the fuser
is in position.
Replace the fuser.
Replace the fuser motor.
Check to confirm that the waste
toner transfer system is operating
properly.
Replace the waste toner motor.
Check the connection of the
S2M board.
Replace the S2M board.
Check the connection of the
V72-2 board.
Replace the V72-2 board.
Check the connection of the
V72-3 board.
Replace the V72-3 board.
Display
Power Off/on
910: Error
to
914: Error
Power Off/on
917: Error
Power Off/on
918: Error
Power Off/on
919: Error
Power Off/on
920: Error
Power Off/on
921: Error
Power Off/on
922: Error
Power Off/on
923: Error
Power Off/on
924: Error
Power Off/on
925: Error
Power Off/on
926: Error
Power Off/on
927: Error
Power Off/on
928: Error
Power Off/on
929: Error
Power Off/on
930: Error
Power Off/on
931: Error
Power Off/on
932: Error
600
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
1200
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓

Oki C9600 Specifications

General

Brand	Oki
Model	C9600
Category	All in One Printer
Language	English