OKIDATA ML320 - Printer Driver Selection

E-12 Section 1
Okidata MICROLINE Standard
Okidata Microline 320/321T
Okidata Microline 320/321
Okidata Microline 520/521
Okidata Microline 292/293
Okidata Microline 192/193
OKIDATA Drivers
Okidata drivers are available for Microsoft
®
Windows
®
95,
Microsoft Windows 3.1x, and Microsoft Windows NT 3.51
and higher, through any of the following means:
➤ Contact the Okidata WorldWide Web site at
http://www.okidata.com
➤ Connect with the OKILINK
®
BBS at
(609) 234-5344
➤ Contact Okidata on CompuServe
®
:
1. GO PCHW.
2. In Library #2, select “Printer Utilities.”
➤ Mail your request for a diskette (3½") to
OKIDATA, P.O. Box 4603, Trenton, NJ 08650-
9852. Specify # MS-9267 for Windows 3.1x
or # MS-9299 for Windows 95
or # MS-9300 for Windows NT
Selecting a Printer Driver
Before you can use your printer with software, you must
enter the software and select the correct printer driver. If
you have the wrong driver selected, you will see strange
characters, incorrect fonts, etc.
Important! See your software documentation for informa-
tion on how to select a printer driver.
Printer Drivers
The drivers below are listed by decreasing compatibility
with your printer: use one as close to the top of the list as
possible.
Epson FX IBM Proprinter III
Okidata ML320/1T Epson Okidata ML320/1T IBM
Okidata ML320/1 Epson Okidata ML320/1 IBM
Epson FX286e IBM Proprinter III
Epson FX 850/1050 IBM Proprinter II
Epson FX 800/1000 IBM Proprinter
Epson FX IBM Graphics Printer