OKIDATA ML320 - Scalable Fonts and Bar Codes; Reliability and Buffer Specs; Paper Type Specifications

Specifications E-35
Paper Specifications:
Paper Type Feed Weight Width Range
Cut sheets Top 14-24 lb. NM
+
: 7.2" to 8.5"
WM
++
: 7.2 to 14.3"
Single-part Rear, 12-24 lb. NM
+
: 3-10"
continuous forms Bottom WM
++
: 3-16"
Carbonless Rear, 9-11 lb. NM
+
: 3-10"
continuous forms Bottom WM
++
: 3-16"
Interleaf Rear, NM
+
: 3-10"
continuous forms Bottom WM
++
: 3-16"
Labels Bottom NM
+
: 3-10"
WM
++
: 3-16"
Envelopes, Top 24 lb. max. 6.5" to 9.5"
single feed
Envelopes, Bottom 24 lb. max. 6.5" to 9.5"
continuous feed,
non-overlap
Card stock Bottom 120 lb. max. N.A.
Transparencies Top — 8.5" x 11"
+
NM = Narrow Model, ML320 Turbo
++
WM = Wide Model, ML321 Turbo
Resident Scalable Fonts*: Courier and Gothic, in sizes
from 22 to 216 points
Bar Codes: Code 39, UPC A, UPC E, EAN 8, EAN 13,
Interleaved 2 of 5, Code 128, Postnet
Receive Buffer Size: 28K
Reliability:
Parameter Reliability
Mean Time Between 10,000 hours at 25% duty
Failures (MTBF) cycle and 35% page density
Mean Time to Repair 15 minutes
(MTTR)
Printhead Life 200 million characters average
in 10 cpi draft mode at 25%
duty and 35% page density
Ribbon Life (on average, 3 million characters
10 cpi utility)
*
Selectable through software only.