OKIDATA ML320 - Menu Mode Navigation

English
Using Your Printer E-23
Entering and Exiting the Menu Mode
To enter or exit the Menu Mode, hold SHIFT while pressing
SEL.
Resetting the Menu
To reset the Menu to the standard settings:
1. Turn the printer off.
2. Press
SEL + LF while turning the printer on.
Printing the Menu Settings
1. Make sure paper is loaded in the printer.
2. Enter the Menu Mode (
SHIFT + SEL).
3. Press
PRINT (PARK key).
Note: To print out a listing of the settings for all menu
items, regardless of the emulation selected or the
accessories installed, enter the Menu Mode, then
press
SHIFT + PRINT QUALITY .
Changing the Menu Settings
1. Press SHIFT + SEL to enter the Menu Mode.
2. Use the
GROUP, ITEM and SET keys to make your
changes:
➤ Press GROUP until the Group you wish to change
appears in the first column.
➤ Press ITEM until the Item you wish to change appears
in the second column.
➤ Press SET until the setting you want appears in the
third column.
3. Press
SHIFT + SEL to exit the Menu Mode and save your
settings.
Important! If you turn the printer off without first exiting
the Menu Mode, the changes you have made
will be lost.