This section contains a listing of the more commonly used
commands. For a listing of all the commands, along with
information on their use, request a copy of the OKIDATA
MICROLINE Reference Manual by filling out the Reference
Manual Request Card in the front of this Users Guide or by
mailing your request to OKIDATA, P.O. Box 4603, Trenton, NJ,
08650.
Epson FX Commands
Epson Command ASCII Decimal
Backspace BS 8
Carriage Return, Execute CR 13
Character Pitch
Select 10 cpi ESC P 27 80
Select 12 cpi ESC M 27 77
Select 15 cpi ESC g 27 103
Select Condensed Print ESC SI, or SI 27 15, or 15
Cancel Condensed Print DC2 18
Section 7:
Epson Command ASCII Decimal
Delete DEL 127
Double Height On ESC w 1 27 119 49
Double Height Off ESC w 0 27 119 48
Double Width On ESC W 1 27 87 49
Double Width Off ESC W 0 27 87 48
Emphasized Print On ESC E 27 69
Emphasized Print Off ESC F 27 70
Enhanced Print On ESC G 27 71
Enhanced Print Off ESC H 27 72
Epson Set 1, Select ESC t 0 27 116 48
Epson Set 2, Select ESC t 1 27 116 49
Italic Printing On ESC 4 27 52
Italic Printing Off ESC 5 27 53
Form Feed FF 12
Form Length
n Inches (n = 1 to 22) ESC C NUL n 27 67 0 n
n Lines (n = 1 to 255) ESC C n 27 67 n
E-41
Commands
To Next Page
Loading...
