OKIDATA ML320 - Page 32

Group Item Settings
Set-Up Reset Inhibit No, Yes
(continued) Print Suppress Effective Yes, No
Auto LF No, Yes
Auto CR
+
No, Yes
Print DEL Code* No, Yes
SI Select Pitch (10 cpi)
+
17.1 cpi, 15 cpi
SI Select Pitch (12 cpi)
+
20 cpi, 12 cpi
Time Out Print Valid, Invalid
Auto Select No, Yes
Centering Position DEFAULT, MODE 1, MODE 2
ESC SI Pitch 17.1 cpi, 20 cpi
Parallel I/F I-Prime Buffer Print, Invalid, Buffer Clear
Pin 18 +5V, Open
Auto Feed XT** Invalid, Valid
E-26 Section 3
* Appears only when the MICROLINE Standard emulation is selected.
+
Appears only when the IBM emulation is selected.
** Applies only when the Epson emulation is selected.