5-19
Okuma America Corporation
CONSTRCONSTR
CONSTRCONSTR
CONSTR
UCTIONUCTION
UCTIONUCTION
UCTION
Rev. 8-21-01
FIPC2 (A911-1843) Fieldnet Input Photo Coupler card
This card has 16 inputs. This card is mounted to the CCOP card. This card reads the signals
sent from various switches and relay contacts associated with the APC.
FOHT (A911-1849) Fieldnet Output High Transistor card
This is an output card capable of handling 32 outputs. This card is used for turning on LED’s
and small control relays. The communication card (CCOP*) can handle only one FOHT.
FOPT (A911-1844) Fieldnet Output Power Transistor card
This card has eight outputs and is used to turn on solenoids, lamps, and relays. One communi-
cation card (CCOP*) can handle up to four FOPT cards.
Fiber Opitic Cable Part Numbers
E4982-702-002-5M (5 meters)Single Core
E4982-702-002-4M (4 meters) Single Core
E4982-702-002-2M (2 meters) Single Core
E9101-I06-001 (3 meters) Single Core
E4982-702-003 (6 meters) Double Core
E9101-I06-002 (10 meters) Double Core
E9101-I06-003 (5 meters)Double Core
E9101-I06-006 (1 meter) Double Core
To Next Page
Loading...
