5-24
Operation on the Machine > Copying
Continuous Scan
Scans a large number of originals in separate batches and then produce as one job.
To scan the next original, press the [Start] key.
After scanning all originals, press the [OK] key. Copying starts.
Auto Rotation
Automatically rotates the image 90 degrees when the sizes of the original and the loaded paper matches but the
orientations are different.
File Name Entry
Adds a file name. Additional information such as job number can also be set. You can check a job history or job status
using the file name or job number specified here.
Enter the file name (up to 32 characters), and press the [OK] key.
To specify a job number, select [Additional Info.] and press the [OK] key.
Character Entry Method (page 10-4)
Value Description
Off Disables the function.
On Enables Continuous Scan.
Value Description
Off Disables the function.
On Enables Auto Rotation.
You can select whether to rotate the image automatically in the default settings. For details, refer to Auto Rotation on
page 7-13.
To Next Page
Loading...
Need help?
General
