2-24
Installing and Setting up the Machine > Setting Energy Saver Function
2 Press the [▲] or [▼] key to select [Common Settings], and press the [OK] key.
3 Press the [▲] or [▼] key to select [Timer Settings], and press the [OK] key.
4 Press the [▲] or [▼] key to select [Power Off Rule], and press the [OK] key.
5 Press the [▲] or [▼] key to select [USB Cable], and press the [OK] key.
2
Set the power off rule.
Press the [▲] or [▼] key to select [Off] or [On], and press the [OK] key.
Power Off Timer
Follow the steps below to select the length of time before the machine shuts off automatically when not in use.
1
Display the screen.
1 Press the [Status/System Menu/Counter] key.
If the login user name entry screen appears during operations, log in by referring to
Administrator User Name and Password
on page 2-20.
The factory default login user name and login password are set as shown below.
Status/Sys. Menu
Common Settings
Common Settings
Timer Settings
Login User Name Login Password
Admin
*1
*1 Upper case and lower case letters are distinguished (case sensitive).
Admin
*1
Timer Settings
Power Off Rule
To Next Page
Loading...
Need help?
General
