Olivetti PGL2645 - Page 101

3-16
Preparation before Use > Loading Paper
Paper Size and Media Type for the Cassettes:
If the size dial is set to one of the sizes below, set the media type
.
"A4", "A5", "B5", "Letter", "Legal" or "A6" (Cas
sette 1 only)
If the size dial is set to "Other", configure the
settings for the paper size and the media type.
1
Display the screen.
[Menu] key > [▲] [] key > [Paper Settings] > [OK] key > [▲] [] key > 
[Cassette 1 (to 5) Set.]
> [OK] key
2
Specify the media type.
1 [▲] [] key > [Media Type] > [OK] key
2 Select the media type, and select the [OK] key
.
3
Specify the paper size.
1 [▲] [] key > [Other Paper Size] > [OK] key
2 Select the paper size, and select the [OK] key.
If you selected [Custom], use the procedure below to specify the paper length and width.
3 [▲] [] key > [Custom PaperSize] in "Cassette 1 (to 5) Set." > [OK] key > [▲] [] key >
[Measurement] > [OK]
key
4 Select the paper size units, and select the [OK] key.
5 [▲] [] key
> [Size Entry(Y)] > [OK] key
6 Enter the paper length, and se
lect the [OK] key.
7 [▲] [] key
> [Size Entry(X)] > [OK] key
8 Enter the paper width, and se
lect the [OK] key.
NOTE
[Cassette 2] to [Cassette 5] are shown when the optional paper feeder is installed.
NOTE
Use the numeric keys or select the [▲] or [▼] key to enter a number.
NOTE
Use the numeric keys or select the [▲] or [▼] key to enter a number.