8-2
Setup and Registration (System Menu) > System Menu
System Menu
Configure settings related to overall machine operation.
Select the [Menu] key to show the se
ttings on the message display. Then, select from the settings displayed.
Refer to
Menu Settings on the following page and configure as needed.
Operation Method (page 2-11)
• In order to change settings that require administer privileges, you must log in with administrator privileges.
The factory default login user name and login pas
sword are set as shown below.
Login User Name: PG L2645: 4500 PG L2650: 5000
PG L2655: 5500
Login Password: PG L2645: 4500 PG L2650: 5000
PG L2655: 5500
• If function default
settings have been c
hanged, the [Reset] key can be selected in each function screen to
immediately change the settings.
To Next Page
Loading...
