7-5
Status/Job Cancel > Device/Communication
Device/Communication
Configure the devices/lines installed or connected to this machine or check their status.
1
Display the screen.
Select [Status], while the machine is printing or awaiting printing.
2
Check the status.
Select the items you want to check. Then, select the [OK] key to show the status of the
selected device.
The items you can check are described
below.
"Keyboard"
The status of the optional USB Keyboar
d and Bluetooth Keyboard are displayed.
"Network"
The network connection status appears.
"Wi-Fi"
• This function is displayed when the wireless network function is available
on the machine.
• The Wi-Fi connection status and network n
ame (SSID) of the machine appear.
"Wi-Fi Direct"
This function is displayed when the wir
eless network function is available on the machine.
• Select [▲] [▼] key > [PushButton Setup]
> [OK] key, and execute the push button of the
device you want to connect to start the connection to the machine.
• Select [▲] [▼] key > [Detai
l Info] > [OK] key, information on the device that is connected
by Wi-Fi Direct appears.
• Select [▲] [▼] key > [Connection
Status] > [OK] key > [Menu]> [▲] [▼] key >
[ConnectedDevices] > [OK] key to display the list of connected devices.
• Select [▲] [▼] key > [Connection
Status] > [OK] key > [Menu]> [▲] [▼] key >
[DisconnectAll] > [OK] key to disconnect all devices.
"Option Network"
The connection status of the optional N
etwork Interface Kit or Wireless Network Interface Kit is
displayed.
To Next Page
Loading...
