Olivetti PGL2645 - Page 51

2-17
Installing and Setting up the Machine > Network Setup
When setting the static IP address
1 [▲] [] key
> [DHCP] > [OK] key > [▲] [] key > [Off] > [OK] key
2 [▲] [] key
> [IP Address] > [OK] key
3 Set the IP address.
4 Select the [OK] key
.
5 [▲] [] key
> [Subnet Mask] > [OK] key
6 Set the subnet mask.
7 Select the [OK] key
.
8 [▲] [] key
> [Default Gateway] > [OK] key
9 Set the default gateway.
10Select the [OK] key
.
11[▲] [] key
> [Auto-IP] > [OK] key
12[Off] > [OK]
key
NOTE
You can set any value between 000 and 255.
Use the numeric keys or select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the position being entered, which
is shown highlighted.
NOTE
You can set any value between 000 and 255.
Use the numeric keys or select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the position being entered, which
is shown highlighted.
NOTE
You can set any value between 000 and 255.
Use the numeric keys or select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the position being entered, which
is shown highlighted.