Olympus BH2 Series - Page 61

r--- - -
- - - . . - - -
1
T 1-7-4 Assemble left and right side Dovetails in posi-
tion respectively.
(See Fig. 11-41
a)
Apply Grease OT2008 to the sliding
surfaces of the Dovetai Is.
Fig. 11-4
11-1-5 Assemble two Douctnils AB031100 by using
two Screws CUK2.Gx5SA for each.
(See Fig. 1 1-51
Fig. 11-5
1 1-1 -6 Move the two dovetails and check far smooth
operntion.
11-1-7 Temporarily clamp the Prism assembly of
P3 and P4 Z,!538700 with two Screws HK3x
5SA. (See Fig. 17-61
Fig. 1 1-6