125
EN
Shooting
2
Adjusting Zoom During Filming (Movie H)
You can zoom in on a selected area of the frame for movie recording without using lens
controls. Use for instant close-ups or cuts to wider angle. Buttons or touch controls
can be used to choose the zoom location and cut to close ups or wide angles during
fi lming.
[Movie H] is a [n Button Function] option. It turns on or off with a button and so must
be assigned to a control using [n Button Function] (P. 116).
• This feature is not available when [4K] or [C4K] is selected for [nK] > [Movie
Resolution].
• This feature cannot be used to fi lm high-speed movies.
• [Movie H] cannot be combined with [Digital Tele-converter] (P. 143).
Using [Movie H]
1
Press the button to which [Movie H] is assigned.
• A frame will appear in the center of the display.
M-ISM-IS
1
1:02:03
n
LL
R
R
30
p
30
p
4K
C-AF
TC 00:00:00:00 DF
0.0
250 F5.6
ISO-A
200
123
min
2
Position the frame as desired.
• Position the frame using touch controls, the multi
selector, or the arrow pad (FGHI).
• To re-center the frame, press the multi selector once or
press and hold the Q button.
Multi selector
3
Press the button to which [Movie H] is assigned once more.
• The camera will zoom the selected area in to fi ll the display.
• To return to the zoom frame, press the button to which [Movie H] is assigned a third
time.
4
To end zoom, press the Q button once, or press and hold the button to which
[Movie H] is assigned.
To Next Page
Loading...
