263
EN
Connecting the Camera to External Devices
5
6
If the camera is able to connect, the network will
be displayed with a check (v) next to the network
name.
• If the camera has been paired with more than one
computer, you will be prompted to choose a computer
before the network is displayed. Highlight the desired
computer using the FG buttons and press the Q
button.
• The camera can be used only with the selected
computer. To select a different computer, you must fi rst
terminate the current connection.
100
%
ww
SSID_001 w
Access Point Connection
R/
Close
Connect by WPS
Connect manually
Set
• If the connection fails, the camera will display a
message to that effect, followed by the options shown in
Step 5. Repeat Steps 5–6.
100
%
ww
Connection failed
7
Press the Q button to exit to the shooting display.
• The camera will return to the standard shooting display.
A w icon will be displayed in the monitor.
w icon
ISO-A
200
1023
1:02:03
P
S-IS AUTOS-IS AUTO
250 F5.6
0.0
30
p
30
p
4K
YFYF
ww
100
%
To Next Page
Loading...
