Chapter 3 Preparation and Inspection
45
ULTRASOUND GASTROVIDEOSCOPE GF-UCT180
Figure 3.17
8. Align the mark on the videoscope cable with mark 1 on the endoscope
connector and push it in until it stops (see Figure 3.18).
Figure 3.18
9. Turn the connector of the videoscope cable towards mark 2 until it stops
(see Figure 3.18).
10. Confirm that the mark on the videoscope cable is aligned with mark 2 on the
endoscope connector.
(1) (2) (3) (4)
Water supply connector
Air supply connector
Water container’s connection adapter
Endoscope connector
Air supply channel
Water supply channel
Metal tip
Mark (gray)
Mark 1 (gray)
Mark 2 (gray)
To Next Page
Loading...
