OMG MF 64 - Page 117

MF 64
Author: Donato Gavino Murru donato.gavino.murru@omgitaly.com Pag. 116 a 179
Note: Use the touch screen page to adjust the position of heating carriage.
Press the lower adjustment key
Note: Set the position value and push the target symbol to reach set point without using arrow
buttons.
Note: Encoder increasing length is in the same direction than the index film travelling in automatic
cycle.
Proximity switches for max and min
position of heating carriage travelling.
New position to be set.
Actual position.
Heater position adjustment.
Automatic target button.
Upper panel settings
Lower panel settings
Longitudinal position of
ovens adjustment
Carriage mode work:
A- Only upper oven
B- Only lower oven
C- Both ovens