OMG MF 64 - Automatic Cycle

MF 64
Author: Donato Gavino Murru donato.gavino.murru@omgitaly.com Pag. 141 a 179
Automatic Cycle
To start the automatic cycle, press the under left button in this page and then enable station one at
a time, pressing on the layout (if the stations are enabled, their word will be highlighted yellow).
The starting form press depends on the setting of the mode page, as shown below.
The forming press cycle start when the index start or stop.
Start cycle button
Mode page
Start setting
Timer and counter cycle