MF 64
Author: Donato Gavino Murru donato.gavino.murru@omgitaly.com Pag. 120 a 179
Temperature
From the main page is possible to set temperature of following heating devices:
Upper Oven
Lower Oven
Trim press die-cut
Edge Pre-Heater
Note: When the actual display is Red, the temperature hasn’t reach the set value. As soon as the
display became green, the temperature is ok and the machine is ready to start.
Check the actual
temperature in this
column
Set desired
temperature in this
column
When devices are ready OK
indication becomes green.
To Next Page
Loading...