MF 64
Author: Donato Gavino Murru donato.gavino.murru@omgitaly.com Pag. 60 a 179
Foundations and positioning on floor
Note: Drawing show in red all the points where the feet must be re-positioned during machine
positioning on the floor.
For correct operation, as well as for its stability, the machine must rest on a well-levelled surface in
accordance with state laws. This foundation must be designed and built according to parameters
dependent on the quality of the support soil: the thickness of the foundation must therefore be
carefully sized to avoid sagging due to the weight and size of the machine.
In the case of uneven floors, make a rigid floor by adding thickness under (for example: steel
plates spacers) the various support points.
To Next Page
Loading...