OMG MF 64 - Forming Device; General Description; Schematic

MF 64
Author: Donato Gavino Murru donato.gavino.murru@omgitaly.com Pag. 127 a 179
Forming Device
General Description
The forming press is use to give a shape to the hot material according to the mold morphology.
The heated material is being dragged by the index system into the forming station.
Which system to use to make a part depends on the operator’s knowledge, experience and the
shape of the parts to be made.
Schematic
Upper toggle
Lower table
Upper table Motor
Lower table Motor
Upper table
Lower toggle