MF 64
Author: Donato Gavino Murru donato.gavino.murru@omgitaly.com Pag. 69 a 179
Water connections
Water is necessary to cool down some parts of the machine like:
mold.
guides chains “pin chain system for index”.
trim press cooling water table.
For that purpose, we supplied a connection system for the water. We suggest that you use water
between + 10 ° C to 30°C. It could be necessary to connect to a chilling system.
For connection, use a screened tube for water in PVC diam. 1” and block it with clamps.
To Next Page
Loading...