OMG MF 64 - Safety

MF 64
Author: Donato Gavino Murru donato.gavino.murru@omgitaly.com Pag. 93 a 179
unrolling.
Tape is stuck
inside the
calendar.
At the end of roll,
supplier tape plastic
to hold to the core.
Material
Open upper carter
and clean the
calendar rolls.
Shut down the
power
The material is
dirty before the
calendar
The roll scratching
on the floor or on the
positioning table.
Roll
Lift the roll using the
appropriate selector
switch.
All modes
The material is
dirty after the
calendar
The calendar rolls
are dirty.
Calendar rolls
Open upper carter
and clean the
calendar rolls.
Shut down the
power
Safety
Do not remove cover or guard without shut down the power. Before
operating machine with power, make sure to re-install guarding
system and make sure that all safety devices are working properly.
Installation, operation, maintenance, or inspection must be performed by
authorized personnel. Not doing so may result in electric shock or injuries.
Do not touch any rotating or moving parts while machine is in
operations or never introduce hands in the calendar when it is
activated. To do so may result in injuries.