MF 64
Author: Donato Gavino Murru donato.gavino.murru@omgitaly.com Pag. 138 a 179
Then move Upper forming table to close position to reach the final position.
Next, set the amount of traveling in inches of the upper forming table (from the Forming page press
from button layout).
Fix the value of position, the speed, and acceleration with the HMI.
Push here for adjust
lower forming table
Push here for adjust
upper forming table
lower forming table
daylight adjustment
upper forming table
daylight adjustment
Automatic Cycle
forming mode
To Next Page
Loading...