MF 64
Author: Donato Gavino Murru donato.gavino.murru@omgitaly.com Pag. 165 a 179
In this page there are timer and counters of the stacker
Note: the number of stacking movement and discharge must be set on the time & counter page.
Set a minimum stacker parking time and choose the number of stacked.
If one stacked is configured, the product will be unloaded out of the machine from the conveyors.
If more than one stacked is configured, the PLC will count the pieces and upon reaching it, they will
be unloaded.
Configure the number of pieces per cycle, to automatically have a total production count.
To Next Page
Loading...