A
A-4 CP1L Programming Examples
SYSMAC CP1L Getting Started Guide 119
Appendix
PLC Setup
On the PLC Settings dialog box, set the sensor input (0.04) to [Quick].
1. Open the CX-Programmer main window.
2. Double-click [Settings] in the project tree.
The PLC Settings dialog box will be displayed.
3. Click the Built-in Input tab.
W07E-EN-02+CP1L+GettingStartedGuide.book Seite 119 Montag, 15. September 2008 11:15 11
To Next Page
Loading...
