Omron DRT1 Series - Page 105

89
Transistor Remote I/O Terminals with Connectors Section 4-5
Note All 32 inputs can be ON simultaneously if the Remote I/O Terminal is mounted
facing up, but sufficient space will need to be allowed between Units depend-
ing on the ambient temperature. Refer to the Dimensions diagram on page
page 93 for details.
Components of the DRT1-ID32ML and DRT1-ID32ML-1
Input Indicators
Note “m” is the first word allocated to the Remote Input Terminal.
Max. simultaneously ON
input points
32 points (See note.)
Number of circuits 32 points with one common
Item Specification
DIP switch
Communications
connector
Pins 1 and 2: Baud rate setting
Pins 3 and 4: Reserved (Always OFF.)
DIN track
mounting hooks
DeviceNet indicators (Refer to page 312.)
Indicate the status of the Slave, communications,
and inputs (lit when input is ON).
Front panel
Rotary switches
(Refer to page 87.)
Set the node address.
(Refer to page 87.)
Top panel Bottom panel
Input connector (MIL)
Connects the 32 inputs via a MIL con-
nector. The MIL cable is sold separately.
Name Meaning
I0 to I15 Indicate the status of bits (contacts) 0 to 15 in word m. Lit
when input is ON; not lit when input is OFF.
II0 to II15 Indicate the status of bits (contacts) 0 to 15 in word m+1. Lit
when input is ON; not lit when input is OFF.