Omron DRT1 Series - Object Mounting; Identity Object (0 X01)

326
Using Another Company’s Master Unit Appendix B
Note For Analog Input Terminals, Analog Output Terminals, and Temperature Input Terminals, Volume I is 1.2
and Volume II is 1.1.
Object Mounting
Identity Object (0x01)
Physical conform-
ance data
Network current consumption 40 mA max. (24 V DC) for the following Units:
CQM1-DRT21, DRT1-HD16S, DRT1-ND16S, and
DRT1-OD08CL
30 mA max. (24 V DC) for the following Units:
DRT1-ID08(-1), DRT1-ID16(-1), DRT1-OD08(-1),
DRT1-OD16(-1), DRT1-ID16T(-1), DRT1-OD16T(-1),
DRT1-MD16T(-1), DRT1-WD16C(-1), DRT1-MD16C(-1),
DRT1-ID16X(-1), DRT1-OD16X(-1), DRT1-AD04,
DRT1-AD04H, DRT1-DA02, DRT1-ID08CL(-1),
DRT1-ID08C, DRT1-HD16C(-1), DRT1-TS04T, and
DRT1-TS04P
25 mA max. (24 V DC) for the following Units:
DRT1-MD16 and DRT1-ID04CL(-1),
50 mA max. (24 V DC) for the following Units:
DRT1-ID16TA(-1), DRT1-OD16TA(-1),
DRT1-MD16TA(-1), and DRT1-ID32ML(-1),
90 mA max. (24 V DC) for the following Unit:
DRT1-OD32ML(-1)
70 mA max. (24 V DC) for the following Units:
DRT1-MD32ML(-1) and DRT1-B7AC
35 mA max. (24 V DC) for the following Unit:
DRT1-OD04CL(-1)
Connector type Open plug
Physical insulation Yes
Supported indicators Module, Network
MAC ID setting DIP switch
Default MAC ID 0
Baud rate setting DIP switch
Supported baud rates 125 kbps, 250 kbps, and 500 kbps
Communications
data
Predefined Master/Slave connection set Group 2 only server
Dynamic connection support (UCMM) No
Explicit message fragmentation support Yes
Object class Attribute Not supported
Service Not supported
Item ID content Get (read) Set (write) Value
Object instance Attribute 1 Vendor Yes No 47
2 Product type Yes No 0
3 Product code Yes No See note 2.
4 Revision Yes No 1.3 (See note 1.)
5 Status (bits supported) Yes No Bit 0 only
6 Serial number Yes No Unique for each Unit
7 Product name Yes No Same as the model name.
8 State NoNo---