67
Transistor Remote I/O Terminals with 3-tier I/O Terminal Blocks Section 4-4
Always turn OFF the communications, internal, and I/O power supplies before
removing or attaching the circuit section.
4-4-3 Transistor Remote Input Terminals with 16 Points and 3-tier I/O
Terminal Blocks: DRT1-ID16TA (NPN) and DRT1-ID16TA-1 (PNP)
Input Specifications
Components of the DRT1-ID16TA and DRT1-ID16TA-1
Item Specification
Model DRT1-ID16TA DRT1-ID16TA-1
Internal I/O common NPN PNP
Input points 16 points
ON voltage 15 V DC min. (between
each input terminal and V)
15 V DC min. (between
each input terminal and G)
OFF voltage 5 V DC max. (between
each input terminal and V)
5 V DC max. (between
each input terminal and G)
OFF current 1.0 mA max.
Input current 6.0 mA max./point at 24 V DC
3.0 mA min./point at 17 V DC
ON delay time 1.5 ms max.
OFF delay time 1.5 ms max.
Number of circuits 8 points with two commons
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
IN
DeviceNet Indicators
DIP switch
DIN track mounting hooks
Communications
connector
Input indicators
Indicate the input status of each contact.
(Lit when the input is ON.)
Terminal block
Pins 1 and 2: Baud rate setting
Pins 3 and 4: Reserved (Always OFF.)
DRT1-ID16TA
REMOTE TERMINAL DC24V
NS
MS
DR0
ON
DR1 NCNC
(Refer to page 312.)
(Refer to page 62.)
Rotary switches (Refer to page 62.)
Set the node address.
Circuit removal screws.
To Next Page
Loading...
