149
Analog I/O Terminals Section 4-8
Dimensions
The following diagram shows the dimensions for the DRT1-AD04 and DRT1-
AD04H Analog Input Terminals. All dimensions are in mm.
4-8-3 Analog Output Terminal: DRT1-DA02
Specifications
General Specifications
12
Mounting holes
40 0.3
±
140 0.3
±
(With connector attached)
Two, 4.2 dia. or M4
40 max.
150 max.
Approx. 73
50 max.
Item Specification
Voltage outputs Current outputs
Output points 2 points (allocated two words in the Master Unit.)
Communications
power supply voltage
11 to 25 V DC (supplied from the communications connec-
tor)
Internal power supply
voltage
20.4 to 26.4 V DC (24 V DC −15% to 10%)
Current consumption Communications: 30 mA max.
Internal circuit: 140 mA max.
Noise immunity
±1.5 kV
p-p,
pulse width: 0.1 to 1 µs, pulse rise time: 1 ns (via
noise simulator)
Vibration resistance 10 to 55 Hz, 1.0-mm double amplitude
Shock resistance
200 m/s
2
Dielectric strength 500 V AC for 1 min (between insulated circuits)
Insulation resistance 20 MΩ min. at 250 V DC (between insulated circuits)
Ambient operating
temperature
0 to 55°C
Ambient operating
humidity
35% to 85% (with no condensation)
To Next Page
Loading...
