Omron DRT1 Series - DRT1-OD16 X (NPN) and DRT1-OD16 X-1 (PNP); Output Specifications; Remote Output Adapters with 16 Points

117
Remote Adapters Section 4-6
4-6-3 Remote Output Adapters with 16 Points:
DRT1-OD16X (NPN) and DRT1-OD16X-1 (PNP)
Output Specifications
Components of the DRT1-OD16X and DRT1-OD16X-1
Item Specification
Model DRT1-OD16X DRT1-OD16X-1
Internal I/O common NPN PNP
Output points 16 points
Rated output current 30 mA/point
Residual voltage 1.2 V max. (30 mA DC,
between each output termi-
nal and G)
1.2 V max. (30 mA DC,
between each output termi-
nal and V)
Leakage current 0.1 mA max.
ON delay time 0.5 ms max.
OFF delay time 1.5 ms max.
Number of circuits 8 points with one common
DeviceNet Indicators
Power supply terminals
DIN track mounting hooks
Communications connector
MIL socket flat cable connector
Connect the output power supply
and output devices such as relays
and indicators through an MIL-type
flat cable connector.
DIP switch
Pins 1 to 6: Node address setting
Pins 7 and 8: Baud rate setting
Pin 9: Reserved (Always OFF.)
Pin 10: Hold/clear outputs for communications error
(Refer to page 312.)
(Refer to page 40.)