73
Transistor Remote I/O Terminals with 3-tier I/O Terminal Blocks Section 4-4
Dimensions The following diagram shows the dimensions for the DRT1-OD16T and DRT1-
OD16T-1 Remote Output Terminals. All dimensions are in mm.
Note The circuit section can be removed by loosening the circuit removal screws.
(Refer to Components of the DRT1-OD16T and DRT1-OD16T-1.)
Always turn OFF the communications, internal, and I/O power supplies before
removing or attaching the circuit section.
4-4-5 Transistor Remote Output Terminals with 16 Points and 3-tier I/O
Terminal Blocks: DRT1-OD16TA (NPN) and DRT1-OD16TA-1 (PNP)
Output Specifications
Two, 4.2 dia. or M4
Mounting holes
170±0.2
40±0.2
58
(83)
180
50
(54)
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
OUT
DRT1-OD16T
REMOTE TERMINAL DC24V
NS
MS
DR0
ON
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
DR1 HOLDNC
Values in parentheses
are reference values.
Item Specification
Model DRT1-OD16TA DRT1-OD16TA-1
Internal I/O common NPN PNP
Output points 16 points
Rated output current 0.5 A/point
Residual voltage 1.2 V max. (at 0.5 A,
between each output termi-
nal and G)
1.2 V max. (at 0.5 A,
between each output termi-
nal and V)
Leakage current 0.1 mA max.
ON delay time 0.5 ms max.
OFF delay time 1.5 ms max.
Number of circuits 8 points
To Next Page
Loading...
