Omron DRT1 Series - Page 28

12
Overview of DeviceNet Section 1-1
General purpose Normal square connectors
Analog Out-
put Terminals
DRT1-DA02 DIN Track
or screws
M3 terminal
block
1 to 5 V, 0 to
10 V, −10 to
10 V, 0 to
20 mA, 4 to
20 mA
M3 termi-
nal block
None
CQM1 I/O
Link Units
CQM1-DRT21 Directly to
PLC
None PLC-to-PLC
link
Supplied
from PLC
None
Environment-resistive Terminals Round communications connectors
Waterproof
Te r m in a l s
DRT1-ID04CL Screws Round, water-
proof connec-
tor (XS2
compatible)
Cable with XS2
connector on
one end and
cables with
XS2 connector
on both ends
with sensor
with direct con-
nector or relay
sensor connec-
tor and sensor
with pull-out
connector
Same as
communi-
cations
power
supply
Cable with
XS2 con-
nector
DRT1-ID04CL-1
DRT1-ID08CL
DRT1-ID08CL-1
DRT1-OD04CL
DRT1-OD04CL-1
DRT1-OD08CL
DRT1-OD08CL-1
Environment-
resistive Tran-
sistor Termi-
nals
DRT1-ID08C Cable with XS2 con-
nector
DRT1-OD08C
DRT1-HD16C
DRT1-HD16C-1
DRT1-WD16C
DRT1-WD16C-1
DRT1-MD16C
DRT1-MD16C-1
B7AC Inter-
face Unit
DRT1-B7AC Screws Round, water-
proof connec-
tor
B7AC x 3 Units Cable
with XS2
connector
None
(communi-
cations
connec-
tions to
B7AC via
round
water-
proof con-
nector)
Special I/O Terminals Normal square connector
C200H I/O
Link Units
C200HW-DRT21 To Back-
plane
None PLC-to-PLC
link
Supplied
from PLC
None
RS-232C
Units
DRT1-232C2 DIN Track
or screws
Two RS-232
ports
Devices with
RS-232C inter-
face (e.g., bar-
code reader)
for two ports
M3 termi-
nal block
None
Type Cable Name Model Mounting I/O
connections
Combined
devices
Internal
power
supply
I/O power
supply