44
Transistor Remote I/O Terminals Section 4-3
The following diagram shows the wiring of the DRT1-ID08-1 Remote Input
Terminal.
Note 1. The V terminals (terminal numbers 9 and 14) are connected internally, as
are the G terminals (terminal numbers 2 and 7). When I/O power is sup-
plied to terminals 9 and 2, power can be supplied to sensors from terminals
14 and 7.
When the power supply exceeds 1.2 A, the power supply should not be in-
put through the terminals; an external power supply must be used instead.
2. Wire colors in parentheses are the previous JIS colors for photoelectric
and proximity sensors.
Internal circuits
power supply
I/O power supply
PNP output 3-wire
sensor
(photoelectric or
proximity sensor)
2-wire sensor
(limit switch)
PNP output 3-wire
sensor
(photoelectric or
proximity sensor)
SOURCE
24 V DC
24 V DC
+
–
+–
+–
Black (blue)
Black (white)
Brown (red)
Blue (black)
Black (white)
Brown (red)
Blue (black)
Brown (white)
To Next Page
Loading...
