57
Transistor Remote I/O Terminals Section 4-3
Output Specifications
Components
Item Specification
Model DRT1-MD16
Internal I/O common NPN
Output points 8 points
Rated output current 0.3 A/point, 2.4 A/common
Residual voltage 1.2 V max. (at 0.3 A, between each output terminal and OUT G)
Leakage current 0.1 mA max.
ON delay time 0.5 ms max.
OFF delay time 1.5 ms max.
Number of circuits 8 points with one common
1513119
1412108
DeviceNet Indicators
DIP switch
Pins 1 to 6: Node address setting
Pins 7 and 8: Baud rate setting
Pin 9: Reserved (Always OFF.)
Pin 10: Hold/Clear outputs for communications error
Communications connector
DIN track mounting hooks
Terminal block
7531
6420
(Refer to page 312.)
(Refer to page 40.)
I/O Indicators
Indicate the status of each input and output.
The left half are for inputs; the right half are
for outputs. (Lit when the input or output is
ON.)
To Next Page
Loading...
